Lloyds Banking Group, 25 Gresham Street

Client: Morris & Spottiswood · Location: Lloyds Banking Group, 25 Gresham Street, City of London EC2V · Particulars: reception walkway soffits and ceiling metalwork prepared and spray-finished RAL 9005 black, working at night with the reception fully protected.
At Lloyds Banking Group’s 25 Gresham Street building in the City, Sinclair Surfaces was brought in by fit-out contractor Morris & Spottiswood to refinish the steelwork of the reception walkway in place: the beams, brackets and hangers beneath the glazed atrium roof, the soffit panels and the tubular rail along the underside of the walkway, all taken from the original mid-grey to RAL 9005 black by spray.
This is a working headquarters reception, so everything was done at night. Each shift started with protection and masking — the living wall directly beneath the walkway, the glazing, the digital displays and the speed gates — and ended with de-masking and a clean-down, so the area was handed back clean at the end of every shift.
The existing coatings were degreased and abraded, any bare or damaged metal was spot-primed, and two full finish coats were spray-applied. Spraying is the only way to get an even, factory-looking black finish across the undersides of beams, bolted brackets and the inside faces of hangers, with no brush marks and no missed edges. Access was from a mobile tower and a podium rather than scaffold.
Refinishing this steelwork off site would have meant stripping a structural element out of a live reception. Spraying it in place gave the client a new finish with no dismantling, no closure and no scaffold. The photos show the finished steel, the same views before and after, and the lads preparing and spraying it inside the masked enclosure.
Services used: On-site spraying, Metalwork repairs & spraying. Part of our surface repairs in London; see also our sectors page and get a quote.
Project Details
CLIENT
Morris & Spottiswood
PROJECT TYPE
Commercial – Banking












