Cladding Repairs
Cladding repairs in London and across the South East, carried out on site: damaged external cladding panels, wall panels, IPS panels and wall tiles restored in place rather than replaced.
Wall tiles can get chipped, cracked or stained, our specialist finishers are able to repair the damage, and blend the repairs into the existing surfaces. We undertake these types of repair on a daily basis, be it on construction sites or in your home. Nothing is too big, and nothing is too small, we cater for all, it’s the Sinclair way.
Metal, wood or composite cladding on the outside of residential or commercial properties are no problem for our specialist technicians. We can put it all right for you.
IPS panels are also repaired as part of our standard set of repair services, we colour match and re coat as required to match the existing surfaces.
Before and After




Cladding repairs across London, at height and at ground level
Cladding repairs in London and the South East are late-build work for Sinclair Surfaces. Panels get damaged as the scaffold comes down, from deliveries and access equipment, and from the odd dropped tool. Replacing a panel means ordering from the original supplier, matching a batch that may have changed, and paying for access again. Sinclair repairs the panel in place and colour-matches the finish.
What we repair
- Powder-coated aluminium and steel cladding panels, fascias, copings and flashings: chips, scratches, dents and corrosion spots
- Timber cladding: splits, chips and weathered sections, stained or coated to match
- Composite, cement-board and high-pressure laminate panels: chips, cracks and scratches
- Internal wall panels and IPS duct panels, see UPVC and IPS repairs
- Wall tiles: chips, cracks and drill holes tinted to the glaze
- Brick slips and stone cladding, see stone and brick repairs
Colour change by spray application
Where the finish is faded, the wrong colour or simply unwanted, we spray-apply a new colour to the existing cladding rather than replacing it. We have carried out full colour changes to external cladding panels on completed developments, with cills, frames and trims done to match. Balconies and balustrades are covered under metalwork repairs and spray finishing.
How a panel repair is done
The damage is prepared back to a sound surface, filled where material is missing and primed. The repair is then sprayed to match the existing colour and texture and feathered into the surrounding panel so there is no visible edge. On timber the repair is stained or coated to match the weathered boards around it. Work is carried out from the scaffold or access equipment already on site, and we provide access towers where required.
Who we work for
Main contractors, cladding installers, housebuilders and facilities managers across London and the South East, from live construction sites to occupied blocks where a panel has been damaged after handover. Managing agents and landlords use us for impact damage, graffiti and faded finishes on existing buildings. Sinclair is CHAS accredited and Constructionline Platinum, with £10m public liability insurance.
Get a quote · Completed projects · Sectors we serve
Covering London, Kent and the South East. Homeowner? See surface repairs for your home.
Recent cladding repairs in London
Most of our cladding repair work in London is for façade contractors and housebuilders in the final weeks before handover. For Century Facades we repaired and resprayed external cladding panels and window frames at One One Six and at Lower Thames Street in the City of London. For L&Q at Greenwich Peninsula the external cladding panels, window frames and soffits were repaired and fully resprayed. For Telford Homes at Capital Interchange Way the scope included repairs and respraying to external cladding and soffit panels, and for Countryside Partnerships at Tower Court in Clapton the external frames and cladding were sprayed in place. On commercial fit-outs, external cladding panels were spray-finished at Film House in Soho and repaired alongside the metal copings at Fitzroy Street for 8build. Outside London, the external cladding at Winchester College was given a full colour change for Gilbert Ash. Every one of these was done with the panels left on the building, from the access already on site.
Frequently asked questions
Can a damaged powder-coated cladding panel be repaired in place?
Yes. Chips, scratches and dents are filled, primed and spray-applied to match the existing colour and texture, with the panel left on the building.
Can you change the colour of existing cladding?
Yes. We spray-apply a new colour to external cladding panels, with frames, cills and trims finished to match.
Do you work at height?
Yes. We work from the scaffold or access equipment already on site, and provide access towers where required.
Do you carry out cladding repairs across London?
Yes. We cover every London borough and the South East from our Kent base, repairing cladding on live sites and on occupied buildings. Send photos of the damage for a quote or call 020 3538 5845.
Related: on-site spraying and colour change for cladding resprays and colour changes.
Read more: Repairing balustrades, cladding, cills and frames before winter – why dented and chipped cladding panels should be made good before the weather turns.
















